QMobile_Blue_5 readed file With cm2

 Card found : S/N : 2465E9B2 , v0150

Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464531324D4207AC61D84E4477

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D4207AC61D84E4477

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x5C33DDA0F6EDAF9591D143D3D9B50C97

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : QMobile

ProdName  : QMobile_Blue_5

ProdModel : QMobile Blue 5

Device    : QMobile_Blue_5

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-n0.mp2-V1_wtk6580.we.n

SECURITY : 

IMEI_SW [1] : 357615090538160

IMEI_SW [2] : 357615095538165

BTMAC Addr  : CC73142F581E

WiFi MAC    : CC7314AF7D28

Done!

Elapsed: 00:00:14

Reconnect Power/Cable!

Operation : HW Test [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464531324D4207AC61D84E4477

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D4207AC61D84E4477

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x5C33DDA0F6EDAF9591D143D3D9B50C97

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Processing Miscellaneous test

MSC : BatteryLevel : 3272 mV

[Processing] FlashMemory Read-Write test

[eMMC] : [SAMSUNG] , BM21E , 0x3A3E00000 , 14910 MiB

[eMMC] : CID : 150100464531324D4207AC61D84E4477

[eMMC] : MODE : SQ-WR

[FAILED : READONLY] : eMMC state seems as READ-ONLY !!!!

Operation Failed

Elapsed: 00:00:32

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.58 ]

Operation : Format FileSystem [ v1.58 ]

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Open port error , something went wrong!

Boot Error!

Operation Failed

Elapsed: 00:00:00

Reconnect Power/Cable!

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464531324D4207AC61D84E4477

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D4207AC61D84E4477

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x5C33DDA0F6EDAF9591D143D3D9B50C97

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Clear FRP ( Google Reset Protection )

Clear Ok!

Clear DIN

Clear Ok!

Clear USERDATA

Format/Reset Error!

Operation Failed

Elapsed: 00:00:32

Reconnect Power/Cable!

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Open port error , something went wrong!

Boot Error!

Operation Failed

Elapsed: 00:00:32

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464531324D4207AC61D84E4477

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D4207AC61D84E4477

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x5C33DDA0F6EDAF9591D143D3D9B50C97

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Clear FRP ( Google Reset Protection )

Clear Ok!

Clear DIN

Clear Ok!

Clear USERDATA

Format/Reset Error!

Operation Failed

Elapsed: 00:00:26

Reconnect Power/Cable!

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464531324D4207AC61D84E4477

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D4207AC61D84E4477

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x5C33DDA0F6EDAF9591D143D3D9B50C97

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Clear CACHE

Format/Reset Error!

Operation Failed

Elapsed: 00:00:14

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Open port error , something went wrong!

Boot Error!

Operation Failed

Elapsed: 00:00:02

Reconnect Power/Cable!

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 17 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464531324D4207AC61D84E4477

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM21E

[eMMC] : FLASH_CID : 150100464531324D4207AC61D84E4477

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0x5C33DDA0F6EDAF9591D143D3D9B50C97

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : QMobile

ProdName  : QMobile_Blue_5

ProdModel : QMobile Blue 5

Device    : QMobile_Blue_5

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-n0.mp2-V1_wtk6580.we.n

[Read Ok] : preloader_t6911_qmobile_we.bin

[Read Error] : Bad UBOOT data

Looks like unusable file , break!

Read error :(

Operation Failed

Elapsed: 00:04:16

Reconnect Power/Cable!

LLD-L21 Frp Don by EFT Pro .......

 Waiting for USB COM 1 port.....Detected {COM4}

Connecting to device.....OK

Writing data 1.....OK

Writing data 3.....OK

Rebooting device to fastboot.....OK

Waiting for fastboot device.....OK

Reading info.....OK

Device Model: LLD-L21

Device Serial: MKJNW18115001686

Device Firmware: :LLD-L21 8.0.0.123(C185)

Device FB Lock: UNLOCKED

Device USER Lock: LOCKED

Device Lock: unlocked

Waiting for fastboot device.....OK

Reading info.....OK

Device Model: LLD-L21

Device Serial: MKJNW18115001686

Device Firmware: :LLD-L21 8.0.0.123(C185)

Device FB Lock: UNLOCKED

Device USER Lock: LOCKED

Device Lock: unlocked

Resetting FRP.....OK

Operation {Reset FRP [Test Point]} ID: 8CEAE117581B51E6

Elapsed time 00:48 -- Version 4.3.7

oppo f5 flashing don by cm2

 Card found : 2465E9B2 , v0150

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.28

Load IDBase v718267 Ok!

Created by Infinity-Box (c) 2021

Chinese Miracle II : MediaTek Service Module

Device Info file   : _Android_info.txt

Patch Level    : N6F26Q

Ver. CodeName  : REL

Ver. Release   : 7.1.1

Sec. Patch     : 2017-10-05

Build Time     : 16.11.2017

Product Manfct : OPPO

Board Platform : mt6763

Product Model  : OPPO CPH1723

Product Brand  : OPPO

Product Name   : CPH1723

Product Device : M6763A

Product Board  : full_oppo6763_17031

Product Info   : oppo6763_17031

SW Version     : A.07

SW OTA Version : M6763A_11.A.07_0070_201711162246

SW OTA Name    : CPH1723EX_11_A.07_171116

Display ID     : CPH1723EX_11_A.07_171116

Kernel Info    : 4.4.22-G201711162246

Preloader [HW DEV] Info : 

 EMI : DEV : MT6763

 EMI : SRC : preloader_oppo6763_17031.bin

 EMI : CNT : 000F

 EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 0 B ]

 EMI : [01] : eMMC : LP_DDR4X : ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]

 EMI : [02] : eMMC : DDR3 : ID : 150100525836344D42 : VEN : SAMSUNG   | DEV : RX64MB : RAM : [ 4.00 GB ]

 EMI : [03] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]

 EMI : [04] : eMMC : LP_DDR4X : ID : 150100334836434D42 : VEN : SAMSUNG   | DEV : 3H6CMB : RAM : [ 6.00 GB ]

 EMI : [05] : eMMC : DDR3 : ID : 150100524836344D42 : VEN : SAMSUNG   | DEV : RH64MB : RAM : [ 4.00 GB ]

 EMI : [06] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]

 EMI : [07] : eMMC : DDR3 : ID : 150100475836424D42 : VEN : SAMSUNG   | DEV : GX6BMB : RAM : [ 3.00 GB ]

 EMI : [08] : eMMC : DDR3 : ID : 150100474536424D42 : VEN : SAMSUNG   | DEV : GE6BMB : RAM : [ 3.00 GB ]

 EMI : [09] : eMMC : DDR3 : ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]

 EMI : [0A] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON    | DEV : S0J9B7 : RAM : [ 3.00 GB ]

 EMI : [0B] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4.00 GB ]

 EMI : [0C] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4.00 GB ]

 EMI : [0D] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 3.00 GB ]

 EMI : [0E] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 6.00 GB ]

Operation : Write Flash [ v2.28 ]

Repartition   : Disabled

Flash Verify  : Disabled

Reg.Pre-Erase : Disabled

Verify HW/SW  : Disabled

SData Backup  : Disabled

Safe UserData : Disabled

Flash Format  : Disabled

Files :16

[FL] : Set : preloader_oppo6763_17031.bin

[FL] : Set : recovery.img

[FL] : Set : md1rom.img

[FL] : Set : md1dsp.img

[FL] : Set : spmfw.img

[FL] : Set : sspm.img

[FL] : Set : sspm.img

[FL] : Set : lk.bin

[FL] : Set : lk.bin

[FL] : Set : boot.img

[FL] : Set : logo.bin

[FL] : Set : tz.img

[FL] : Set : tz.img

[FL] : Set : system.img

[FL] : Set : cache.img

[FL] : Set : userdata.img

[FL] : Total size : 0xF9BB7FA8 [ 3.90 GB ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after

2. Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM3)

MODE : PRELOADER PORT

PORT : 3

Waiting BOOT ack ...

PRELOADER : ACK confirmed!

BROM : Init BROM

BROM init passed!

     CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001

     CODE : Bianco

     TYPE : MODERN [RAPHAEL]

BROM : SecLevel : 0x00000005

BROM : SecMode  : SBC+SDA

BROM : BROM|BL  : 0xFF|0x02

BROM : PRELOADER PORT

BROM : PreBoot stage #1

BROM : PreBoot stage #2

AGENT : 0_base : BASE_v2112 | Manual : Disabled

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6763

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

     BROM : Reset Interface!

PTFN : MediaTek USB Port_V1633 (COM58)

MODE : BOOTROM

PORT : 58

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001

     CODE : Bianco

     TYPE : MODERN [RAPHAEL]

BROM : MEID : 16FA33B7FA6EE4D315DF5877B4D4051B

BROM : SecLevel : 0x000000E5

BROM : SecMode  : SBC+SDA+EXT

BROM : BROM|BL  : 0x05|0xFE

BROM : BOOTROM

BROM : SOCID : FB0E950472946F3C1F71B5D6E7EE2F0E37FB24EC78518057738449EBE51BE489

BROM : SLA : Local Auth 

BROM : SLA : Auth Started!

BROM : SLA : Auth Passed!

BROM : SLA : 0x0000001F

BROM : PreBoot stage #1

BROM : PreBoot stage #2

AGENT : 0_base : BASE_v2112 | Manual : Disabled

AGENT : Look for suitable BootChain in DA ... 

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6763

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ... 

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : MT6763

     EMI : SRC : preloader_oppo6763_17031.bin

     EMI : CNT : 000F

 EMI : [00] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 0 B ]

 EMI : [01] : eMMC : LP_DDR4X : ID : 150100444836444D42 : VEN : SAMSUNG   | DEV : DH6DMB : RAM : [ 4.00 GB ]

 EMI : [02] : eMMC : DDR3 : ID : 150100525836344D42 : VEN : SAMSUNG   | DEV : RX64MB : RAM : [ 4.00 GB ]

 EMI : [03] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG   | DEV : RH64AB : RAM : [ 4.00 GB ]

 EMI : [04] : eMMC : LP_DDR4X : ID : 150100334836434D42 : VEN : SAMSUNG   | DEV : 3H6CMB : RAM : [ 6.00 GB ]

 EMI : [05] : eMMC : DDR3 : ID : 150100524836344D42 : VEN : SAMSUNG   | DEV : RH64MB : RAM : [ 4.00 GB ]

 EMI : [06] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG   | DEV : GD6BMB : RAM : [ 3.00 GB ]

 EMI : [07] : eMMC : DDR3 : ID : 150100475836424D42 : VEN : SAMSUNG   | DEV : GX6BMB : RAM : [ 3.00 GB ]

 EMI : [08] : eMMC : DDR3 : ID : 150100474536424D42 : VEN : SAMSUNG   | DEV : GE6BMB : RAM : [ 3.00 GB ]

 EMI : [09] : eMMC : DDR3 : ID : 150100524436344D42 : VEN : SAMSUNG   | DEV : RD64MB : RAM : [ 4.00 GB ]

 EMI : [0A] : eMMC : DDR3 : ID : 13014E53304A394237 : VEN : MICRON    | DEV : S0J9B7 : RAM : [ 3.00 GB ]

 EMI : [0B] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4.00 GB ]

 EMI : [0C] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 4.00 GB ]

 EMI : [0D] : DRAM : DDR3 : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 3.00 GB ]

 EMI : [0E] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN   | DEV :  : RAM : [ 6.00 GB ]

     EMI : Init EMI from PRELOADER

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]

        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A484347386134A235E049199341

        EMMC: VEN : HYNIX : OEM : 74 : ID : 484347386134

        EMMC: VEN : HYNIX : HCG8a4

        EMMC: SNN : 903891225 ( 0x35E04919) , MF : 9/2016

        EMMC: 

              BOOT1  : 0x00400000 [ 4.00 MB ]

              BOOT2  : 0x00400000 [ 4.00 MB ]

              RPMB   : 0x00400000 [ 4.00 MB ]

              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 631566C2E58BA081338D34EBE552D074

DA : USB : HIGH-SPEED

Boot done!

SEC_DL : False (RAPHAEL)

SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Flashing now ... 

Write : PRELOADER

Update bootloader backup copy ... 

Update bootloader backup copy Ok!

Write : RECOVERY

Write : MD1IMG

Write : MD1DSP

Write : SPMFW

Write : SSPM_1

Write : SSPM_2

Write : LK

Write : LK2

Write : BOOT

Write : LOGO

Write : TEE1

Write : TEE2

Write : SYSTEM

Write : CACHE

Write : USERDATA

SEC_DL : False (RAPHAEL)

SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Flashing finished!

Done!

Elapsed: 00:03:33

Reconnect Power/Cable!

PHILIPS E311 Flash File free

 heloo

Download 

PHILIPS E311 Flash File freeee!!!!!!!!

We have all type of services of online software all over world via team viwer

We provide wll type of gsm services ...

Via tem viwer online services

Qualcomm HS-USB QDLoader 9008 (COM58)

Operation : Flash

Checking for existing devices...Found

Port : Qualcomm HS-USB QDLoader 9008 (COM58)

Driver Info : Network Connect, qcusbser.sys, 3.0.0.0

Opening Port...OK

Init Handshake Sequence...OK

Hardware ID : E1A00900 [8953] 65001500

OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688

Initializing Protocol...OK

Using Auto Loader Selection [1]

Preparing Loader...Done

Sending Loader [8953_030]...Done

Executing Loader...OK

Detecting Storage Type...OK

Hardware : 8953, EMMC, 64 GB

LU Count : 3 [0x0747C000] [0x00002000] [0x00002000] 

WARNING! High Speed Driver is not installed.

Please install driver from QcFire\Drivers folder using Device Manager.

Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512

Reading Partition Table...OK

Reading Device Information...OK

Device : unknown

Software : System 8.2.0.036(04A0) [Mon Mar 18 16:34:38 CST 2019]

Android Ver. : 8.1.0

Patch Level : 2019-03-01

Writing [gpt] -> [gpt] ...Done

Writing [sbl1] -> [sbl1] ...Done

Writing [rpm] -> [rpm] ...Done

Writing [tz] -> [tz] ...Done

Writing [devcfg] -> [devcfg] ...Done

Writing [dsp] -> [dsp] ...Done

Writing [keystore] -> [keystore] ...Done

Writing [frp] -> [frp] ...Done

Writing [mota] -> [mota] ...Done

Writing [dip] -> [dip] ...Done

Writing [syscfg] -> [syscfg] ...Done

Writing [apdp] -> [apdp] ...Done

Writing [msadp] -> [msadp] ...Done

Writing [dpo] -> [dpo] ...Done

[PROTECTIVE_FLASH] Skipping [fsc] -> [fsc]

Writing [ssd] -> [ssd] ...Done

Writing [mcfg] -> [mcfg] ...Done

[PROTECTIVE_FLASH] Skipping [modemst1] -> [modemst1]

[PROTECTIVE_FLASH] Skipping [modemst2] -> [modemst2]

Writing [misc] -> [misc] ...Done

Writing [oeminfo] -> [oeminfo] ...Done

Writing [bootfail_info] -> [bootfail_info] ...Done

Writing [rrecord] -> [rrecord] ...Done

Writing [rainbow] -> [rainbow] ...Done

Writing [pad0] -> [pad0] ...Done

Writing [aboot] -> [aboot] ...Done

Writing [cmnlib] -> [cmnlib] ...Done

Writing [cmnlib64] -> [cmnlib64] ...Done

Writing [keymaster] -> [keymaster] ...Done

Writing [fsg] -> [fsg] ...Done

Writing [DDR] -> [DDR] ...Done

Writing [sec] -> [sec] ...Done

Writing [devinfo] -> [devinfo] ...Done

Writing [limits] -> [limits] ...Done

Writing [modem] -> [modem] ...Done

Writing [erecovery_kernel] -> [erecovery_kernel] ...Done

Writing [erecovery_ramdis] -> [erecovery_ramdis] ...Done

Writing [erecovery_vendor] -> [erecovery_vendor] ...Done

Writing [kernel] -> [kernel] ...Done

Writing [ramdisk] -> [ramdisk] ...Done

Writing [recovery_ramdisk] -> [recovery_ramdisk] ...Done

Writing [recovery_vendor] -> [recovery_vendor] ...Done

Writing [persist] -> [persist] ...Done

Writing [cache] -> [cache] ...Done

Writing [odm] -> [odm] ...Done

Writing [preload] -> [preload] ...Done

Writing [patch] -> [patch] ...Done

Writing [log] -> [log] ...Done

Writing [version] -> [version] ...Done

Writing [product] -> [product] ...Done

Writing [cust] -> [cust] ...Done

Writing [vendor] -> [vendor] ...Done

Writing [system] -> [system] ...Done

Set Boottable Storage Drive to 0...Done

Reading Partition Table...OK

Resetting FRP Lock.......Done

Resetting device...Done

Operation Finished.

QcFire Ver. 8.1

moto XT1754 FRP DON BY UMT MTK 5.0.2

 Operation : MTK One Click

Hold VOL UP + DOWN and connect USB Cable.

Some phone may have different key combination for BROM mode.

Waiting for device in BROM mode...

Port: COM56 [MediaTek USB Port (COM56)]

Device Path: \\?\usb#vid_0e8d&pid_0003#5&d08e94a&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}

Chipset: 0x0335, [MT6737M] [Unknown]

Hardware Info: 0x8A00, 0xCA00, 0x00

Config : [SecureBoot: True] [SLA: False] [DA Auth: True]

MEID: F7A9FB6BA1E57419D6AB69545CDC0B7C

Preparing device...

-- Success!

Preloader saved as : preloader_wt98736b32_ba1_220819_171949.bin

DA : MTK_AllInOne_DA.bin

Waiting for Phone in Flash Mode...

Connect Power Off phone within 30 secs...

Port : MediaTek USB Port (COM56)

Connected to BROM.

Sending Download Agent...

connect DA end stage: 2, enable DRAM in 1st DA: 0

Connecting to HighSpeed Port...

Waiting for HighSpeed Port..

Port : MediaTek DA USB VCOM (Android) (COM57)

device path: \\?\usb#vid_0e8d&pid_2001#5&24be0c9b&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}

Connected to Download Agent..

Syncing with Target...

Reading Partition Table...

Storage : eMMC

Reading Information...

Brand : motorola

Manufacturer : motorola

Model : Moto C

Prod. Name : namath_54

Device : namath

Build Date : 2019年 03月 20日 星期三 09:13:43 CST

Build Flavor : namath_54-user

Build Desc. : wt98736b32_ba1-user 7.0 NRD90M 1553044434 release-keys

Platform : mt6737m

Android Ver. : 7.0

Display ID : NRD90M.062

Patch Level : 2018-11-05

Data missing! Could not read extended information!

Userdata is NOT ENCRYPTED

Seeking FRP Data...

Resetting FRP...

- Success!

Disconnect Battery/Cable and Power On Phone.

[UltimateMTK Ver. 5.0]

What is auto activation in 3uTools?

 2018-09-19 

1141207 Posted by 3uTools. What is Activation lock? Activation Lock, also named iCloud Lock, is designed to prevent anyone else from using your iOS device if it's ever lost or stolen. Activation Lock is enabled automatically when you turn on Find My iPhone........

EFT ICLOUD BY PASS

 

IM BACK

  FROM TODAY IN MOBILE SOFTWARE WITH BIGEST UPDATES OR NEW MUCH DATA ENTERY

EFT SETUP

 EFT SETUP